SUSTAINABLE FARMING:
For best results, thoroughly stir MicroSoil® concentrate, then dilute by adding 100 liters or quarts of water to 1 liter of MicroSoil®. Stir again thoroughly before spraying this 100 liter/quart dilution over (1) one hectare or 2 ½ acres. (Note: Best if ground is wet prior to application.) If practical, apply to soil 1-2 weeks prior to planting or at seeding. If practical, a soil analysis of your growing medium should precede any application to help ensure maximum crop yields .
TURF/LAWNS/GRASSES:
For best results, thoroughly stir MicroSoil® concentrate then dilute by adding 100 to 200 parts of water to 1 part MicroSoil® concentrate. (Note: 200 to i ratio is recommended with thick grass or in heavy thatch. Extra water is used to carry MicroSoil® down into the soil). Mix thoroughly before applying 20 gallons of dilution per acre then sprinkle/water thoroughly. If using pivot or flood irrigation, 1 ½ to 2 parts of MicroSoil® with 200 parts may be needed on first application. For best results, apply as early in the season as possible. Mow and water grass before using, and water again after application.
FLOWERS/PLANTS/GARDENS:
For best results, mix (1) one liter of MicroSoil® concentrate with 100 liters/quarts of water. Mix again thoroughly before applying (Note: 2 liters/quarts of dilution per 1000 square feet).
TREES & TRANSPLANTING:
For best results, thoroughly stir MicroSoil® concentrates then dilute with (Note: 50 parts of water to 1 part MicroSoil® concentrate). Mix thoroughly before using. Use approximately 1 quart of dilution per 6 feet of tree height (i.e. 2 quarts if tree height is 12 feet). Injection into roots is best, however, soaking into root structure with water is also very effective.
COMPOST HEAPS:
MicroSoil® is the perfect microbial accelerator for stimulating the decomposition process within compost heaps. Dilute by adding 50 parts of water to 1 part MicroSoil® concentrate. Use at the minimum rate of one liter/quart per each cubic yard of compost.
NOTE:
MicroSoil® is intended to promote an increased population of beneficial soil microorganisms, thus helping to build a higher level of organic matter in the soil. Because microorganisms are subject to degradation upon exposure to high temperatures, ultra violet light or long storage periods, we recommend applying MicroSoil® as soon as possible after diluting with water. Do not freeze or expose to temperatures over 120O F. IMPORTANT: ALWAYS REMEMBER TO MULCH OR COMPOST WITH CROP RESIDUES (or add a carbon source, i.e., Blackstrap Molasses) AS MicroSoil®'s PRIMARY SOURCE OF FOOD, WHETHER IN YOUR GARDEN OR ON YOUR FARM, IS THE CARBON FROM THE PAST SEASON'S PLANT AND CROP RESIDUES.
Ingredients:
By weight: 93.7% H20 solution with a proprietary blend of enzymes, 6.3% non-pathogenic soil microorganisms including Azotobacter and Clostridium and a proprietary blend of natural occurring nutrients, minerals, vitamins and natural polysaccharides and polypeptides.
MicroSoil® Label Sample
Manufactured by Biomassters, Inc., 4894 W. Lone Mountain Road, Suite 191, Las Vegas, Nevada 89130 U.S.A.
